Emak Fan & Project Solutions

The blades are backward curved in YOB series.

Used for the ventilation of industrial premises in general, particularly preferred for aspiration of extremely dusty air and granule material where the high pressure of the system is vital.

Static and dynamic vibration defects are recovered after production appropriate with ISO 1940 norms. Rotation of fans are signed on casing. Please determine fan position while giving order.

Standard the casing is formed from a steel sheet St 37.2 with a grey (RAL 7036) paint finish, optional hot dip galvanized, furnace paint or epoxy paint.

While YOB series is manufactured between 500 – 30.000 m 3/h and 100 – 1500 mmWG; YOB-T series is manufactured 1.500 – 150.000 m 3/h and 50 – 600 mmWG.

Ventilation of technical, industrial and commercial premises in general, particularly preferred for aspiration of extremely dusty air and material where the high pressure of the system is an important consideration.

All parts of centrifugal fans are made of steel sheet called St 37 except special applications.

Standard casing is protected with grey (RAL 7036) paint finish, optional hot dip galvanization, epoxy paint or furnace paint is available. The blades are backward curved in YOB series. Heavy Duty bearings and drive parts are chosen for the belt driven (YOB-T) models, Bearing is pre-greased before assembling.

Belt Adjustment system is standard. You can use following accessories with YOB (T) Models.