Emak Fan inline type

Long casing is the type widely used in In-line, End-line or Booster operations. Due to ventilation of technical, industrial or commercial premises in general. Particularly TAM type preferred for the most of the standard applications.

TAM type is produced between Ø250 mm – Ø1000 mm with different impeller angle combinations. Above Ø1000 mm we may refer TAM MAX series or EMWA Series for mid and high air volumes.

The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.

A-B-B0-C-D-E-F-G and H series of performance curves are suitable to use with this type.

Static and dynamic vibration defects are recovered after production according to appropriate ISO norm.

Long casing is the type widely used in In-line, End-line or Booster operations. Due to ventilation of technical, industrial or commercial premises in general Particularly TAM type preferred for the most of the standard applications.

The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available. TAM types are produced with circular flanged as standard, square flange models are optional.

The hub section is made of aluminum alloy, the impeller part is polypropylene. (RP&BP) or aluminum alloy (RA & MAX), steel (RS) or stainless steel (RSS)