GENERAL SPECIFICATIONS
- EMAK STF series are equipped with some accessories enables mobilization, the base is similar to standard TAM series except additional accessories.
- Ventilation of industrial premises where the mobile service needed.
- The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.
- A-B-B0-C-D-E-F-G and H series of performance curves are suitable to use with this type.
- STF type fans produced between Ø250 mm – Ø1000 mm with different impeller angle combinations. For the applications above Ø1000 mm please contact EMAK.
- Static and dynamic vibration defects are recovered after production according to appropriate ISO norm.
 Please Click For Details (pdf)
APPLICATIONS
EMAK STF series are equipped with some accessory enables mobilization, the base is similar to standard TAM series except additional accessories.
FAN CASING
The standard casing is formed from the St 37.2 steel sheets with grey (RAL 7036) paint finish, optional hot dip galvanized, furnace paint or epoxy paint is possibilities.
ELECTRIC MOTORS
Please Click For Details (pdf)
IMPELLER
While hubs are made of aluminum alloy, the impeller part is polypropylene. (RP&BP) or aluminum alloy (RA & MAX)
ACCESSORIES
STF type fans are delivered with wire guard (HT) as a standard in order to safe operation.
Also you can use following accessories with STF Model:
Please Click For Details (pdf)
|
