Emak Fan & Project Solutions

This special type is designed with special futures to resist tough sea conditions on ships like increased steel thickness, hot dip galvanized casing and optional futures like IP 56 water resistant electric motor, matching flanges, leak proof sea water hood with damper.

EMAK offers wide range 50 Hz and 60 Hz models for ships. Especially C series with 3000 rpm has important role in MTH type marine fans where the room is important.

MTH type produced between Ø250 mm – Ø1250 mm with different impeller angle combinations. For the applications above Ø1250 mm please contact EMAK

The casing is formed from the St 37.2 steel sheets thicker then standard models, hot dip galvanization is applied after production, optional grey (RAL 7036) paint finish, furnace paint or epoxy paint is available upon request.

A-B-B0-C-D-E-F-G and H series of performance curves are suitable to use with this series.

Static and dynamic vibration defects are recovered after production according to appropriate ISO norm.

This special type is designed with special futures to resist tough sea conditions on ships like increased steel thickness, hot dip galvanized casing and optional futures like IP 56 water resistant electric motors, matching flanges, leak proof sea water cover.

The casing is formed from the St 37.2 steel sheets thicker then standard models, hot dip galvanization is applied after production, optional grey (RAL 7036) paint finish, furnace paint or epoxy paint is available upon request.

While hubs are made of aluminum alloy or steel, Impeller parts are aluminum alloy (RA & MAX) or optional polypropylene (RP)

Increased steel thickness and hot dip galvanized casing is standard, you may additionally ask for following accessories.