Emak Fan & Project Solutions

For the applications where low noise level and high air flow rate is essential.

Sizes of the EM type belt driven fans in four models EM 50-45-36-30.

The Impeller section is formed CAD/CAM operated machines with AISI 316 Stainless Steel material. The body, louver and wire guards are formed St 37 galvanized steel. The louver section is automatically opens when Fan operated.

The assembling to your application is easy, because the prismatic fan construction.

Static and dynamic vibration defects are recovered after production according to appropriate ISO norm.

For the applications where low noise level, high air flow rate is essential. Automatic front shutters prevents air bypass during the fan is switched off. Additionally EM type is appreciated for corrosive and dusty environments.

The Impeller section is AISI 316 Stainless Steel. The body, louver and wire guards are formed from the St 37 galvanized steel sheets. Protective drain holes opened disallow the water accumulation inside the casing.

Electric specifications can be three-phase as 380 V (400/415) – 50 Hz (standard), 440 V – 60 Hz and other necessary voltages are possible. Standard motor protection is class is F, S1, with IP 55 enclosure, electric motor is belt driven.

Belt driven impeller is stainless steel and produced in CAD/CAM operated machines.

EM model is delivered with, Automatic louver, wire guards on both sides as standard .