GENERAL SPECIFICATIONS
- General HVAC applications that require direct assembling to wall or a base.
- Short casing covers impeller section only.
- Square or Circular Flanges supplied standard on the fan side, enables easy and direct coupling to the application area.
- DTK type Fans produced standard between Ø250 mm – Ø1000 mm with different impeller angle combinations. For the applications above Ø1000 mm please contact EMAK.
- The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.
- A-B-B0-C-D-E-F-G and H series of performance curves are suitable to use with this type.
- Static and dynamic vibration defects are recovered after production according to appropriate ISO norm.
 Please Click For Details (pdf)
APPLICATIONS
General HVAC applications that require direct assembling to wall or a base.
FAN CASING
The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.
ELECTRIC MOTORS
Please Click For Details (pdf)
IMPELLER
The hub section is made of aluminum alloy, the impeller part is polypropylene. (RP&BP) or aluminum alloy (RA & MAX), steel (RS) or stainless steel (RSS.
ACCESSORIES
The hub section is made of aluminum alloy, the impeller part is polypropylene. (RP&BP) or aluminum alloy (RA & MAX), steel (RS) or stainless steel (RSS.
Please Click For Details (pdf)
|
