Emak Fan & Project Solutions

Extracts or Supplies air directly through the roof, for general ventilation or smoke extract (EFF CTF Models) For ; stores, warehouses, workshops, factories, commercial premises, agricultural buildings. CTF type differs from EMAK URF with the possibility of using both for supply and exhaust.
The wire guard HT is delivered standard with this model protects foreign materials to rich moving parts.

CTF types are produced between Ø250 mm – Ø1000 mm as standard with different impeller angle combinations. For the applications above Ø1000 mm please contact EMAK

The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.

A-B-B0-C-D-E-F-G and H series of performance curves are suitable to use with this type.

Static and dynamic vibration defects are recovered after production according to appropriate ISO norm.

Extracts or Supplies air directly through the roof, for general ventilation or smoke extract (EFF CTF Models) For ; stores, warehouses, workshops, factories, commercial premises, agricultural buildings.

The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.

The hub section is made of aluminum alloy, the impeller part is polypropylene. (RP&BP) or aluminum alloy (RA & MAX), steel (RS) or stainless steel (RSS) In this model also you can use (Patent protected) EMAK Reversible type impellers for air supply and discharge.

Axial roof model CTF is delivered on square mounting base with protection hood and factory wired electric terminal box, also wire guard HT according to European norms is standard.