GENERAL SPECIFICATIONS
- Designated to handle corrosive fumes, hot air and gases. Suitable for temperatures up to 300 ºC continuously (Optional). Also can be produced explosion proof type (BCF-AEX).
- BCF types produced between Ø450 mm – Ø1000 mm as standard with different impeller angle combinations. For the applications above Ø1000 mm please contact EMAK.
- The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available.
- A-B-B0-C-D-E-F-G and H series of performance curves are suitable to use with the BCF type fans within a 15 to 25 % increase of the electric motor power.
- Static and dynamic vibration defects are recovered after production according to appropriate ISO norm
 Please Click For Details (pdf)
APPLICATIONS
BCF –Bifurcated Type Fans are designed to handle corrosive fumes, hot air and gases. Suitable for temperatures up to 300 ºC continuously (Optional). Additionally it is preferred where the electric motor is required to be completely out of air stream
.
FAN CASING
The casing is formed from the St 37.2 steel sheets with integral supports. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available. The safety precautons for e lectrostatic charges by use of anti-static materials, gap clearances of impellers and other Ex criretia for Ex-Proof BCF-AEX models have been taken.
ELECTRIC MOTORS
Please Click For Details (pdf)
IMPELLER
The hub section is made of aluminum alloy, the impeller part is polypropylene. (RP&BP) or aluminum alloy (RA & MAX), steel (RS) or stainless steel (RSS)
ACCESSORIES
You can use following accessories with BCF Models :
Please Click For Details (pdf)
|
