GENERAL SPECIFICATIONS

• The blades are backward curved in AE series.

• Ventilation of technical, industrial and commercial premises in general, particularly preferred for aspiration of air in clean, dusty and greasy environment.

• Static and dynamic vibration defects are recovered after production appropriate with ISO 1940 norms. Rotation of fans are signed on casing. Please determine fan position while giving order.

• The casing part is formed from the St 37.2 steel sheets with grey (RAL 7036) paint finish, optional hot dip galvanization, furnace paint or epoxy paint is possible.

• While AE series is manufactured between 200 – 25.000 m 3/h and 10 – 150 mmWG; AE-T series is manufactured 200 – 200.000 m 3/h and 50 – 150 mmWG.

Please Click For Details (pdf)

APPLICATIONS

Ventilation of technical, industrial and commercial premises in general, particularly preferred for aspiration of clean and slightly dusty air

CONSTRUCTION

All parts of centrifugal fans are made of St 37 steel as standard, except special applications. The grey (RAL 7036) paint finish is applied after production, optional hot dip galvanization, furnace paint or epoxy paint is available. The blades are backward curved in AE series. Heavy Duty bearings and drive parts are chosen for the belt driven (AB-T) models, Bearing is pre-greased before assembling.

ELECTRIC MOTORS

While AE series is direct drive, AE – T series is belt driven

Please Click For Details (pdf)

ACCESSORIES

Belt Adjustment system is standard. Also you can use following accessories with AE/AE-T Models :

Please Click For Details (pdf)